Published 11:07 IST, November 21st 2020
iPhone 12 Pro Max has side sensors similar to the one's in DSLR, here's how it works
Apple recently introduced the iPhone 12 phone ranges for its users across the world. Read on to find out what the new iPhone 12 Pro Max side sensor does.
- Tech
- 3 min read
The new iPhone 12 series has taken the world by storm ever since it released on October 13, 2020. The iPhone became available for purchase on October 23, 2020. The most expensive phone amongst all the iPhone 12 range phones is the iPhone 12 Pro Max, which costs around ₹1,29,000 for a 128 GB model and ₹1,39,000 for the 256 GB model. In a recent video, the iPhone 12 Pro Max was subjected to a teardown by YouTuber Zack Nelson aka JerryRigEverything, and this wild experiment offered a peek into what the internals are like. Read on to know more about the iPhone Pro Max side sensor.
iPhone 12 Pro Max Buttons
In his video, the Youtuber specifically highlighted what the new sensor-shift image stabilisation on the iPhone 12 Pro Max can look like. In a blog on its official website, Apple has claimed that this new technique can stabilise an image at over 5,000 times per second. In simple terms, this is a massive improvement over the current optical image stabilisation (OIS) technique which, according to Apple, stabilises an image at 1,000 times per second. The teardown video also sheds light on the difficulty faced while removing the battery.
YouTube Zac Nelson’s video on iPhone Pro Max
Nelson begins the video by prying open the iPhone 12 Pro Max display carefully using heat and his other tools. We can see that the display comes off without much damage and Nelson moves on to try and remove the battery. After unhinging a few screws, he tries to pull the battery out using Apple's embedded pull tabs. However, he is unable to do so and instead, he has to resort to using fast-evaporating alcohol to get the glue at the bottom of the battery to loosen up a bit.
After his herculean efforts to pull out of the battery succeed, Nelson goes on to remove the rear camera module that has three sensors. The top camera has a telephoto sensor which has a traditional OIS where the lens does the moving to gather steady footage. In addition to this, there is a wide-angle sensor on the side that lacks OIS, and the main camera is said to have the new sensor-shift image stabilisation technique.
What’s so special about the iPhone 12 Pro Max side sensor?
What’s special about the iPhone 12 Pro Max right side sensor is that this sensor-shift technology is found traditionally on DSLRs, and Apple is said to be the first to introduce it in smartphones. So, the new image stabilisation technique essentially enables the sensor to shift in place, instead of the lens. This according to Apple’s blog is meant to help in the process of stabilisation significantly as it happens at the picture collection point itself, the sensor.
Updated 11:07 IST, November 21st 2020